Product tips
Hydro-Lacquer for glas VER-01000 - VER-01xxx
Purpose:
Surface refinement of glass and ceramics – dishwasher safe
Gloss level: mat
Colour shade: colourless and coloured
Pre-treatment of surface:
Good paint-bonding and suitability for dishwasher is only ensured on purified surface, which must be free of dirt and surface agents. Pre-treatment by dishing with rinsing agent in the dishwasher of by hand, then washing-up with (distilled) water. After cleaning the parts should only be touched wearing gloves.
Processing:
Stir lacquers very well before using them. Lacquer the parts by dipping in or suffuse with lacquer. It is also possible to paint (with a brush), stamp (with a sponge) or spray the parts.
Drying:
Flash-off: ca. 15 min, depending on size of the objects
Minimum 30 min. at max.150°C in oven
Non-adherence of this drying conditions degrades adhesion and the suitability for dishwasher.
Storage/storage life:
Keep in a dry place, at room temperature.
Stable in original sealed hob bock max. for 12 month .
Safety advice:
Comply with the national rules and regulations and follow the safety data sheets. Take care for sufficient ventilation.
Glas Lacquer
« back